Avidemux Forum

Avidemux => Windows => Topic started by: AnUser on January 28, 2016, 02:38:49 PM

Title: Save end before really end!
Post by: AnUser on January 28, 2016, 02:38:49 PM
Hello from Hungary!
this avidemux very good.
my system: win xp, msi760GM board

While saving, sometimes the end detected before really end.
He writes: "succesfully saved", but this is about 70% closed (some files).
According to its own flow chart is not over yet ...
The end of the saved video is missing. (eg. The video total:1h20min, but he cut/end on 1h04min.)
(my saved files files: (always) xvid avi, with mp3 stereo audio)
I do not know why on a few video, still doing it, and the rest is completely saved.
I tried several times, so I installed again.
(my version 2.6.5. later versions were the case, I put return this.)
Do not offer additional ones, do not work well voice of ts files.)

in other words:
according to its own flow chart should still continue.

Thank you for answers!
Title: Re: Save end before really end!
Post by: Jan Gruuthuse on January 28, 2016, 03:06:15 PM
Check Edit -> Settings -> [Output]
[v] Create OpenDML files
If still issue check:
Split MPEG files every (MB) [790] (increase to acceptable size for missing 20 minutes)

Otherwise are you using joined video parts?
- does avidemux asks to load sequential videofiles (001,002, ...): answer no, append these manually.
If still an issue? Do you make cut on video parts on keyframe: only selectable with up or down keyboard arrow, not with left or right arrow.

Before testing remove the related .idx2 files.

Try nightly: http://www.avidemux.org/nightly/ select accordingly 32 or 64 bit matching your xp.

If all fails there could be errors in the video file (recording/internet transport/ ...)
Title: Re: Save end before really end!
Post by: AnUser on February 01, 2016, 02:09:45 PM
Thanks!
I tried all along.
The circle has narrowed:
really, the second part of the concatenated file "forget" but whether it is manual or automatic append.
(The IDX files i delete before any new trial.)
The error is therefore of the idx file: appended, but not in terms of saving adds up ...
If you like, i send the created idx files...
Title: Re: Save end before really end!
Post by: Jan Gruuthuse on February 01, 2016, 04:31:46 PM
idx? Working with 2.5.6? Try 2.6 32 or 64 bit matching your windows 32/64-bit from here (http://www.avidemux.org/nightly/)<- click
Title: Re: Save end before really end!
Post by: AnUser on February 01, 2016, 10:16:27 PM
Hello!
This is error, entry point not found.
(see picture)
otherwise, in the newer verions ts file audio is BAD!!
Title: Re: Save end before really end!
Post by: Jan Gruuthuse on February 02, 2016, 07:06:36 AM
USP10.DLL = Uniscribe Unicode script processor
Most likely you have issues with localised characters?
- keep you file(s) and path name(s) short, like (c:\video)
- don't use space in file or path names.
- use standard US ascii (https://en.wikipedia.org/wiki/ASCII) A-Z and a-z only. Don't use diacritic characters.

Quoteotherwise, in the newer verions ts file audio is BAD!
That is not a big help for developers! Your description is to general. I can not confirm issues with audio in mpeg-ts: not in stereo, ac3 or mutliple tracks.
Title: Re: Save end before really end!
Post by: AnUser on February 02, 2016, 06:50:53 PM
Hello, you're right.
I think the characters have no problem(see picture).
If you hope for serious help,
Willingly will send up a audio-recording or video recording of this problem.
But "it works for me" types of responses i have been very bored.
Title: Re: Save end before really end!
Post by: mean on February 02, 2016, 06:56:30 PM
win xp => not supported
Title: Re: Save end before really end!
Post by: AnUser on February 02, 2016, 07:13:07 PM
Thank you.
That is why I use the 2.6.5.
Even should operate normally, the entire file is saved, what it promises ... this is not OS dependent ...
(see problem on the top)
Title: Re: Save end before really end!
Post by: Jan Gruuthuse on February 03, 2016, 06:43:05 AM
Quote from: AnUser on February 02, 2016, 06:50:53 PM
I think the characters have no problem(see picture).
Not of the program! Your video files or where your videos are in the folder! Location name and paths.

QuoteBut "it works for me" types of responses i have been very bored.
- Development on 2.5.6 is halted!
- Windows XP: End OF Life: Support for Windows XP ended on April 8, 2014. For more information, see Windows XP support has ended.

no further comment from me (basic user)

Title: Re: Save end before really end!
Post by: douche on February 03, 2016, 08:25:28 PM
Quote from: AnUser on February 02, 2016, 07:13:07 PM
Thank you.
That is why I use the 2.6.5.
Even should operate normally, the entire file is saved, what it promises ... this is not OS dependent ...
(see problem on the top)
Download and install 2.6.11. Now download usp10.dll v1.626.6001 (only this version works) from dll-files.com and copy it to your Avidemux install folder. Now the latest version works on XP .

Test now your avi file in Avidemux 2.6.11.
Title: Re: Save end before really end!
Post by: AnUser on February 04, 2016, 09:36:50 AM
Hello!
Thank you very much!

Woking, but now "BAD audio" problem...
The .ts file audio is bad (I would say: Jumbled) but this ts file audio on VLC player and on Avidemux 2.6.5  is good...
:-\
Title: Re: Save end before really end!
Post by: mean on February 04, 2016, 02:26:29 PM
A sample would help
Title: Re: Save end before really end!
Post by: AnUser on February 09, 2016, 06:33:41 PM
Hello!

Thanks!
Where do I send it?
3 x 10 MB  avi file
Title: Re: Save end before really end!
Post by: mean on February 09, 2016, 07:16:29 PM
dropbox/Mega then PM me please