Author Topic: version 2.7 not working  (Read 1313 times)

realwildchild

  • Newbie
  • *
  • Posts: 11
version 2.7 not working
« on: January 05, 2019, 05:16:02 AM »
i updated to ver 2.7 but the program wont work and i was also having problems with 2.6 recently
it goes to save a video and the program just hangs and wont do anything it just freezes.
im using this on windows 8.1

eumagga0x2a

  • Moderator
  • Hero Member
  • *****
  • Posts: 2723
Re: version 2.7 not working
« Reply #1 on: January 05, 2019, 07:30:07 AM »
Please uninstall whatever Avidemux versions are currently installed (anything older than 2.7.1 is legacy and unsupported) and try out either r190103 from here if you have a 64 bits Windows or r190104 from here if it is 32 bits.

If problems persist, please provide details (admlog.txt from %localappdata%\avidemux, literally quoted Windows error messages etc.).

realwildchild

  • Newbie
  • *
  • Posts: 11
Re: version 2.7 not working
« Reply #2 on: January 10, 2019, 09:40:07 AM »
no still not working on either 32bit or 64bit program

eumagga0x2a

  • Moderator
  • Hero Member
  • *****
  • Posts: 2723
Re: version 2.7 not working
« Reply #3 on: January 10, 2019, 01:23:15 PM »
Regrettably, you still haven't provided any usable information. Without such info and not having a Windows 8.1 installation to test it is impossible to assess what is going on.

realwildchild

  • Newbie
  • *
  • Posts: 11
Re: version 2.7 not working
« Reply #4 on: January 11, 2019, 07:13:04 AM »
how do i get this log i couldnt find it in the program section (admlog.txt from %localappdata%\avidemux,

eumagga0x2a

  • Moderator
  • Hero Member
  • *****
  • Posts: 2723
Re: version 2.7 not working
« Reply #5 on: January 11, 2019, 05:18:18 PM »
What do you mean by "program section"? This is the path to the folder where admlog.txt is stored by Avidemux. The path contains an environment variable %localappdata%, enter this path into the location bar of Windows Explorer or using the "run" dialog to open this folder.

If Avidemux doesn't even arrive at the point when it can create the folder and the file, there should be some error messages from Windows which could shed light on the problem.

realwildchild

  • Newbie
  • *
  • Posts: 11
Re: version 2.7 not working
« Reply #6 on: January 15, 2019, 12:42:46 PM »
heres what the last bit of the log says

End of movie,
 video frames : 112
Track 0 Size :11283 bytes, 27 blocks
[save] 12:15:20-597 [AviMuxer] Wrote 112 frames, nb audio streams 1
[close] 12:15:20-599 [AviMuxer] Closing
[~xvid4Encoder] 12:15:20-600 [xvid4] Destroying.
[~ADM_audioStream_autoDelete] 12:15:20-616 Killing son audioStream
[~ADM_audioStream_autoDelete] 12:15:20-624 Killing son audioAccess
[stopThread] 12:15:20-625 Destroying threadQueue
[runAction] 12:15:20-625 Audio Thread, received stop order
[stopThread] 12:15:20-626 Thread stopped, continuing dtor
[FilterAccess] Destroyed
[Bridge] Destroying bridge
[Lame] Deleting lame
[~ADM_threadQueue] 12:15:20-628 Killing audio thread and son
[AviMuxer] Destructing
[stopThread] 12:15:21-099 Destroying threadQueue
[runAction] 12:15:21-100 Audio Thread, received stop order
[runAction] 12:15:21-101 Exiting video thread loop
[stopThread] 12:15:21-184 Thread stopped, continuing dtor
[~ADM_threadQueue] 12:15:21-186 Killing audio thread and son
[rewind] 12:15:21-186 Rewinding
[switchToSegment] 12:15:21-186 Trying to switch to seg 0 with startTime in reference pic= 44296 ms
[seektoTime] 12:15:21-190 Seeking to frame 2340 at 42065 ms
[DecodePictureUpToIntra] 12:15:21-191 Decoding up to intra frame 2340, ref: 0
[edCache] Flush
[canSupportThis] 12:15:21-212 DXVA2 not enabled
[lookup] 12:15:21-213 No Matching Hw accel
[ADM_FFgetFormat] 12:15:21-213 No Hw Accel for that
[seektoTime] 12:15:23-095 Image found, pts=44296 ms
[switchToSegment] 12:15:23-095 Switched ok to segment 0 (dontdecode=0)
[rewind] 12:15:23-097 Rewinding
[switchToSegment] 12:15:23-097 Trying to switch to seg 0 with startTime in reference pic= 44296 ms
[seektoTime] 12:15:23-099 Image found in cache, pts=44296 ms
[switchToSegment] 12:15:23-099 Switched ok to segment 0 (dontdecode=0)
[start] 12:15:23-100 admPreview,starting
[convertLinearTimeToSeg] 12:15:23-100 Frame time=0, taking first segment
[convertLinearTimeToSeg] 12:15:23-105 Frame time=0, taking first segment
[seektoTime] 12:15:23-115 Seeking to a keyframe at 45282 ms
[seektoTime] 12:15:23-116 Seeking to frame 2520 at 45282 ms
[DecodePictureUpToIntra] 12:15:23-117 Decoding up to intra frame 2520, ref: 0
[edCache] Flush
[canSupportThis] 12:15:23-127 DXVA2 not enabled
[lookup] 12:15:23-128 No Matching Hw accel
[ADM_FFgetFormat] 12:15:23-128 No Hw Accel for that
[goToTimeVideo] 12:15:23-182 Seek done, in reference, gone to 45282033 with segment start at 44296911
Close event!
[HandleAction] 12:15:47-074 ************ EXIT **************
[HandleAction] 12:15:47-074 Closing ui
[A_saveSession] 12:15:47-075 Saving the current state of editing
Scripting video streams
Scripting segments
Scripting markers
Scripting post-processing
Scripting video encoder
Scripting video filters
Scripting audio tracks
Scripting muxer
[renderDestroy] 12:15:47-116 Cleaning up Render
[stop] 12:15:47-117 stopping simple render.
[~simpleRender] 12:15:47-117 Destroying simple render.
[Qvideo]Destroying QVideo
[~myQApplication] 12:15:48-886 Cleaning render...
[renderDestroy] 12:15:48-887 Cleaning up Render
[~myQApplication] 12:15:48-888 Cleaning preview...
[destroy] 12:15:48-888 Destroying preview
Cleaning up
[destroy] 12:15:48-897 Destroying preview
[deleteAll] 12:15:48-898 [Editor] Deleting all videos
[lavc] Destroyed
[~ADM_edAudioTrackFromVideo] 12:15:48-904 Destroying edAudio from video track 0 at b7326d8
[deleteAll] 12:15:48-905 [Editor] Deleting all videos
[cleanup] 12:15:48-906 Deleting post proc
[deleteAll] 12:15:48-907 [Editor] Deleting all videos
[Script] Tinypy INFO - Closing Python
[quitSdl] 12:15:48-912 [SDL] quitSDL.
[ADM_vf_clearFilters] 12:15:49-598 clear filters
[admDxva2_exitCleanup] 12:15:49-599 Dxva2 cleanup begin
[cleanup] 12:15:49-599 This binary has no DXVA2 support
[admDxva2_exitCleanup] 12:15:49-972 Dxva2 cleanup end
[ADM_ad_cleanup] 12:15:49-973 Purging audio decoder
[ADM_vf_cleanup] 12:15:50-497 Destroying video filter list
--End of cleanup--

Images stat:
___________
Max memory consumed (MB)     : 0
Current memory consumed (MB) : 0
Max image used               : 0
Cur image used               : 0
[ADM_ExitCleanup] 12:15:51-625
Goodbye...

[~myQApplication] 12:15:51-631 Exiting app
[save] 12:15:53-722 Saving prefs to C:\Users\Jason\AppData\Roaming\avidemux\config3.tmp
[destroy] 12:15:53-745 Destroying preview
Normal exit
[abortExitHandler] 12:15:53-746 already done, nothing to do

eumagga0x2a

  • Moderator
  • Hero Member
  • *****
  • Posts: 2723
Re: version 2.7 not working
« Reply #7 on: January 15, 2019, 12:56:30 PM »
Please compress (7z, zip, no rar) the full log and attach it to your reply. The end of the log you posted doesn't include the version information (it may be an old log).

realwildchild

  • Newbie
  • *
  • Posts: 11
Re: version 2.7 not working
« Reply #8 on: January 15, 2019, 01:16:24 PM »
file attached

eumagga0x2a

  • Moderator
  • Hero Member
  • *****
  • Posts: 2723
Re: version 2.7 not working
« Reply #9 on: January 15, 2019, 01:20:23 PM »
In other words, Avidemux (a win64 win32 nightly from 2019-01-04) runs just fine. What is the problem?

edit: oops, it was not a 64bit build...
...and the operating system is Windows 8, not Windows 8.1.

Does the latest build from https://avidemux.org/nightly/vsWin64/ ("Avidemux_2.7.1 VC++ 64bits 190109.exe") fail to run? What about r190113 from here?
« Last Edit: January 15, 2019, 02:40:08 PM by eumagga0x2a »

realwildchild

  • Newbie
  • *
  • Posts: 11
Re: version 2.7 not working
« Reply #10 on: January 16, 2019, 12:17:09 AM »
yeah thats from 2004 youre looking at.
after i finish editing a file and go to encode it,the program just hangs and wont do anything

eumagga0x2a

  • Moderator
  • Hero Member
  • *****
  • Posts: 2723
Re: version 2.7 not working
« Reply #11 on: January 16, 2019, 12:43:02 AM »
I can confirm that the Xvid encoder is broken (it crashes on Linux actually in the libxvidcore library, but maybe hangs on Windows, can't test at the moment). You could use the Mpeg4 ASP (ff) encoder for now if you really have to use legacy stuff (DivX and AVI container).

eumagga0x2a

  • Moderator
  • Hero Member
  • *****
  • Posts: 2723
Re: version 2.7 not working
« Reply #12 on: January 16, 2019, 01:07:31 AM »
FFmpeg crashes when trying to encode using xvid4 too, so I think it is libxvidcore which is broken.

eumagga0x2a

  • Moderator
  • Hero Member
  • *****
  • Posts: 2723
Re: version 2.7 not working
« Reply #13 on: January 16, 2019, 01:52:06 AM »
libxvidcore works on Fedora only when built with assembly disabled, otherwise crashes immediately.

realwildchild

  • Newbie
  • *
  • Posts: 11
Re: version 2.7 not working
« Reply #14 on: January 16, 2019, 03:09:51 AM »
so do i just reinstall FFmpeg  and the mpeg encoders to?